What are the advantages of electromagnetic flowmeter

What are the advantages of the electromagnetic flowmeter? Operating the pump in a dry condition will damage parts or cause cavitation in the centrifugal pump.The parts can add up to more than a thousand dollars.This cost does not include pump operation efficiency is not high or harm manufacturing or operation shutdown time.

Technology for pump protection

 

Many technologies are capable of implementing pump protection.Steam flowmeters can be applied, but not always necessary for continuous flow measurements, generally at higher cost than switching.Mechanical equipment total flow switch to use mechanical equipment to start the relay;However, with the change of time, moving parts will be damaged and improve maintenance, and if there is viscous liquid or accumulation, then the credibility of the switch will suffer bad harm.

 

Tuning forks and ultrasonic flowmeters are some other techniques for pump protection.The technical certainty that a fork or gap must be wet or dry can be tested.As a result, they were unable to detect a decrease in total flow and opened their mouths to create an interior space for future congestion.

 

Why choose electromagnetic flowmeter

 

Electromagnetic flowmeter is ideal for pump protection.The application of electromagnetic flowmeter is similar to the basic principle of rapid mass flowmeter.Hydrodynamics moves heat from the tip of the electrode, reducing the temperature difference between the thermal resistance temperature detector (RTD) and the reference RTD.Then the temperature difference increases or decreases due to heat conduction, the preset value is achieved and the car relay is switched off.The manufacturer will refer to the "alarm" situation at the setting point.How automotive relays are wired (nc-co or no-co) depends on the requirements of use.Both high and low total flow rates can be tested against thermal diffusion switches.

 

According to the heat pipe cooling, customers can get ** strong role and coordination ability.The advantages of the technology include: no moving parts and less and less maintenance;Many camera types are suitable for water or thicker liquid mounted on the horizontal or bisector, remove the upper dead center that must be installed;Optional remote control installation of electronic components;Network hotspot options available;In contrast to the main pipe, low total flow test;Current output of development trends and common fault markers;Temperature compensation reduces the drift of the setting point under the temperature of the transition operation.

 

Shanghai China xi instrument co., LTD is a family enterprise, engaged in the development and production of high precision flowmeter, our products have been exported to more than 150 foreign countries, and many foreign customers have established a long-term partnership.Our products to customer needs as the leading, customized service structure also solved the special customer needs, to meet all customer needs, is our enterprise product guidance!

Last：Detection of electromagnetic fl.. Next：Selection of locations for inst..